![background image](http://html1.mh-extra.com/html/omron/cs1w-etn01/cs1w-etn01_operation-manuals_742528167.webp)
8-1
Section
Overview of Mail Function
156
8-1
Overview of Mail Function
The mail function can be used to send user-created information, error log infor-
mation, and status information as e-mail to an address set in the CPU Bus Unit
System Setup. Mail can be triggered in any of the following ways:
•
When an error is registered to the error log.
•
At regular intervals.
•
When a dedicated control switch is turned ON.
Note A mail server is required in order to use the mail function. Mail server settings
require specialized knowledge and should always be handled by the network
administrator. Be sure you have a clear understanding of the mail system before
using this function. Mail delivery is not guaranteed. Depending on factors such
as the condition of the network, mail that has been sent may not arrive at its des-
tination.