![background image](http://html1.mh-extra.com/html/omron/cs1w-etn01/cs1w-etn01_operation-manuals_742528218.webp)
11-3
Section
Command/Response Reference
208
Timeout Value (Command)
The maximum control time between receiving the receive request and storing
the result. If this set time limit is exceeded, the code for a timeout error will be set
as the results storage response code. The value is set in units of 0.1 s. The time-
out time is unlimited if the value is set to 0.
Stores the received data.
Response Codes
Response code
Description
0000
Normal
0105
Local IP address setting error
0302
CPU Unit error; execution not possible.
1001
Command too large
1002
Command too small
1100
TCP socket number or number of reception bytes is out of
range.
1101
The variable type for the results storage area is out of range.
1103
Non-zero bit address specified for the results storage area.
220F
The specified socket is receiving data.
2210
No connection could be established to the specified socket.
2211
High traffic at Unit; cannot execute service.
Results Storage Area Response Codes
Response code
Description
0000
Normal
003E
Internal buffer cannot be reserved due to high receive load
(ENOBUFS).
0042 (see note)
Received ICMP data (EMSGSIZE).
0044 (see note)
Received ICMP data (ENOPROTOOPT).
0045 (see note)
A communication error occurred with the remote node
(ECONNABORTED).
004B
A communication error occurred with the remote node
(ECONNRESET).
004E (see note)
Incorrect destination IP address (ENETUNREACH).
No network number in IP router table.
Router incorrectly set.
004F (see note)
Received ICMP data (EHOSTDOWN).
0051 (see note)
Received ICMP data (EHOSTUNREACH).
Router incorrectly set.
0053
A communications error occurred with the remote node
(ETIMEDOUT).
0066
Internal memory cannot be allocated; cannot execute
service.
0080
A receive request timeout error occurred.
0081
Socket was closed while receiving.
Note These errors occur only in large multilayered networks.
Received Data (Results
Storage Area)