![background image](http://html1.mh-extra.com/html/omron/cs1w-etn01/cs1w-etn01_operation-manuals_742528183.webp)
10-4
Section
Error Log Error Codes
173
Error
code
EE-
PROM
Correction
Detailed error code
Meaning
Error
code
EE-
PROM
Correction
2nd byte
1st byte
Meaning
0103
Resend count exceeded (send
failed)
Commands
Bit 15:
OFF
Check transceiver at remote
node.
---
0105
Node address setting error (send
failed)
Bits 08 to 14: SNA
Bits 00 to 07: SA1
Set the IP address correctly.
---
0107
Remote node not in network
(send failed)
Responses
Bit 15:
ON
Check the connection to the
remote node.
---
0108
No Unit with specified unit
address (send failed)
Bits 08 to 14: DNA
Bits 00 to 07: DA1
Check the unit address at the
remote node.
---
010B
CPU Unit error (send failed)
Troubleshoot the error in the
CPU Unit using the PC operation
manual.
---
010D
Destination address not in routing
tables (send failed)
Set the destination address in the
routing tables.
---
010E
No routing table entry (send
failed)
Set the local node, remote node,
and relay nodes in the routing
tables.
---
010F
Routing table error (send failed)
Create the routing tables
correctly.
---
0110
Too many relay points (send
failed)
Reconstruct the network or
correct the routing tables so that
commands are sent to within a
3-level network range.
---
0111
Command too long (send failed)
Check the command format and
set the correct command data.
---
0112
Header error (send failed)
Check the command format and
set the correct command data.
---
0117
Internal buffers full; packet
discarded
Change the network so that traffic
is not concentrated.
---
0118
Illegal packet discarded
Check for nodes sending illegal
packets.
---
0119
Local node busy (send failed)
Change the network so that traffic
is not concentrated.
---
0120
Unexpected routing error
Check the routing tables.
---
0121
No setting in IP address table;
packet discarded
Set the remote node in the IP
address table.
---
0122
Service not supported in current
mode; packet discarded
Select the IP address table or
both methods for the address
conversion method.
---
0123
Internal send buffer full; packet
discarded
Change the network so that traffic
is not concentrated.
---
0124
Maximum frame size exceeded;
routing failed
Reduce the size of events.
---
021A
Logic error in setting table
00
01: Data link
table
02: Network
parameters
03: Routing
tables
04: Setup
05: CPU Bus
Unit Words
(CIO/DM)
Recreate the data specified by
the 2nd byte of the detailed error
code.
Saved