![background image](http://html.mh-extra.com/html/omron/cj1w-pnt21/cj1w-pnt21_operation-manuals_742351090.webp)
3-19
3 Configuration Software
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
3-3 PROFINET
IO C
ontroller DT
M
3
3-
3-1 D
T
M User I
nterface
Configuration Interface Buttons
Master DTM Configuration User Interface
The IO Controller DTM Configuration User Interface contains five main items.
•
PROFINET Identification
•
Configuration
•
Diagnosis
•
Firmware
•
DTM Information
The five items are discussed below.
Configuration Interface Buttons
The IO Controller DTM Configuration User Interface contains four general buttons. The table below
shows the name and the action for each button.
Precautions for Correct Use
Precautions for Correct Use
Changes made by the user are saved in the DTM only, and not in the Project. This is indicated
by the asterisk next to the DTM in the Network view. The next time in the same session the GUI
is opened, the changes will still be there. To save the changes permanently, for example to hard
disk, click the File - Save option from the main menu of CX-ConfiguratorFDT.
Button
Action
OK
Evaluate and save the changes made (if any) and close the user interface.
I
f any invalid settings have been made, a warning message will be displayed
allowing cancellation of the command.
Cancel
Closes the user interface without saving.
If any changes were made, a warning message is displayed allowing cancel-
lation of the command.
Apply
Evaluate changes and save them.
Help
Launch context sensitive Help for the Active tab.