3 Configuration Software
3-18
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
3-3
PROFINET IO Controller DTM
To allow configuration and data monitoring from within CX-ConfiguratorFDT a CJ1W-PNT21 PROFI-
NET IO Controller DTM is installed. The DTM shows up in the Device Catalogue under the following
name:
The PROFINET IO Controller DTM has three main user interface components.
1
DTM Configuration User Interface
This user interface facilitates configuration of the IO Controller Unit.
2
DTM PROFINET Identification.
This user interface facilitates detection of IO Devices and configuration of IO Device Names.
3
DTM Diagnostics User Interface
The DTM Diagnostics User Interface facilitates Unit status determination, IO Device status
determination, and changing the Unit’s PROFINET operational mode.
This section provides an overview of the PROFINET IO Controller DTM, and discusses the user inter-
faces.
Opening the DTM
To open the CJ1W-PNT21 IO Controller DTM:
•
Select and double-click the IO Controller DTM in the Network view.
•
Select and right-click the IO Controller DTM in the Network view. Next, select
Configuration
from
the context menu.
The IO Controller DTM Configuration User Interface, which is displayed in the CX-ConfiguratorFDT
DTM view is shown below.
Description
Functions
CJ1W-PNT21 PROFINET IO Controller
•
IO Configuration of PROFINET IO Controller Unit.
•
Monitoring of PROFINET IO Controller Unit.
•
Provide an Acyclic communication channel with PROFINET IO Devices.
3-3-1
DTM User Interface
