5-9
5 Operation
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
5
-3 Co
nf
igurin
g t
h
e IO
Co
ntro
ller
5
5-
3-1 PLC
S
e
tup
5-3
Configuring the IO Controller
After configuring all the slave DTMs, the CJ1W-PNT21 IO Controller DTM must be configured. In order
to open the IO Controller DTM Configuration Interface do either one of the following.
•
Select the CJ1W-PNT21 IO Controller DTM in the Network view and double-click the left mouse
button.
•
Select the CJ1W-PNT21 IO Controller DTM in the Network view, and right click the mouse. From
the context menu, select
Configuration
.
•
Select the CJ1W-PNT21 IO Controller DTM in the Network view, and from the Device menu,
select
Configuration
.
The DTM Configuration User Interface is shown below.
Communication
The communication path needs to be set to communicate with the IO Controller. By pressing the
Configure
button. The CX-Server configuration screen appears. Set the communication path and
press the
Test
button to check if the IO Controller can be reached. The Description and the Firm-
ware Version is displayed in the PROFINET IO Controller Unit Information.
Opening the Master DTM Configuration Interface
5-3-1
PLC Setup