Appendices
A-6
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
The device variables for CJ-series Units that correspond to bits 1 to 126 or word n+9 to n+16 are as
follows:
Word n+17 to n+25 (IO Device New Alarm Flags)
The device variables for CJ-series Unit that corresponds to all bits of word n+17 to n+25 are as fol-
lows:
The device variables for CJ-series Units that correspond to bits 1 to 126 or word n+17 to n+25 are
as follows:
CJ-series I/O memory and NJ-series CJ Unit memory
NJ-series device vari-
ables for CJ-series
Unit
Word number
Bit number
CJ-series function name
Variable name
n+9 to n+16
1 to 126
The IO Device Data Exchange Active flags indicate
for each IO Device if it is in Data Exchange mode
with the PROFINET IO Controller Unit. The flags are
allocated to a block of eight CIO words, and each bit
in the block corresponds to a IO Device number as
set in the DTM (IO Device Setup tab).
*_DevInDataValid
CJ-series I/O memory and NJ-series CJ Unit memory
NJ-series device vari-
ables for CJ-series
Unit
Word number
Bit number
CJ-series function name
Variable name
n+9 to n+16
1 to 126
Corresponding IO Device Input Data Valid (Array)
*_DevInDataValid
CJ-series I/O memory and NJ-series CJ Unit memory
NJ-series device vari-
ables for CJ-series
Unit
Word number
Bit number
CJ-series function name
Variable name
n+17 to n+25
1 to 126
The IO Device New Alarm flags indicate for each IO
Device if it has sent a new alarm message to the
PROFINET IO Controller Unit. The flags are allo-
cated to a block of eight CIO words, and each bit in
the block corresponds to the IO Device number as
set in the DTM (IO Device Setup tab).
*_DevAlm
CJ-series I/O memory and NJ-series CJ Unit memory
NJ-series device vari-
ables for CJ-series
Unit
Word number
Bit number
CJ-series function name
Variable name
n+17 to n+25
1 to 126
Corresponding IO Device has sent new alarm infor-
matino
(Array)
*_DevAlm
