Omron C200H-CT021, Operation Manual

Page: 126 / 162

119
Control Codes of IORD and IOWR Instructions
Section 10-2
10-2 Control Codes of IORD and IOWR Instructions
This section describes how the control codes of the IORD and IOWR instruc-
tions are used in each mode.
Simple Counter Mode OK: Possible
NG: Not possible
Linear and Circular Modes OK: Possible
NG: Not possible
DM Set item IORD instruction control code IOWR instruction control code
#00XX #CCXX #00XX #CCXX #FX00
--- XX = 0 to 99 --- XX = 0 to 99 X = 1, 2, 3
m Operating mode NG OK NG NG ---
Present counter value --- --- --- --- OK
DM Set item IORD instruction control code IOWR instruction control code
#00XX #CCXX #00XX #CCXX #FX00
XX = 0 to 15 XX = 0 to 99 XX = 0 to 15 XX = 0 to 99 X = 1, 2, 3
m Operating mode NG OK NG NG ---
m+1 Counter 1 input NG OK NG NG ---
m+2 Counter 2 input NG OK NG NG ---
m+3 First word num-
ber of block of
words storing
data transferred NG OK NG OK ---
m+4 Number of data
blocks trans-
ferred NG OK NG OK ---
m+5 Counter 1
ranges enabled NG OK NG OK ---
m+6 Counter 2
ranges enabled NG OK NG OK ---
m+7 to
m+8 Counter 1 maxi-
mum count value NG OK NG OK ---
m+9 to
m+10 Counter 2 maxi-
mum count value NG OK NG OK ---
m+11 to
m+14 Not used NG OK NG OK ---
m+15 to
m+19 Ranges 0 to 15 OK OK OK OK ---
~
m+90 to
m+94
m+95 to
m+99 Not used NG OK NG OK ---
Present counter value --- --- --- --- OK