Omron C200H-ASC11, Manual, Page: 29 / 301

19
Nomenclature and Functions
Section 2-1
2-1-2 Front Panel
Indicators
C200H-ASC31
•
Back Pane l
(Same for all models.)
Battery
START/STOP switch
User memory
default switch
Backplane
connector
Note The above diagram shows the Unit with the cov-
er removed. The caution on the cover will be
added from Units shipped after November 1998.
Indicators
Unit No. switch
Terminal port (port 3):
RS-232C
Communications
port 1: RS-232C
Communications
port 2: RS-232C
Battery
connector
Cover
Indicator Color Name Display Meaning Bit in allocated
IR/CIO area
words
RUN Green Unit operation Lit The ASCII Unit is operating normally. ---
Not lit An error has occurred. The CPU Unit power is
turned OFF, or the MPU in the ASCII Unit is out of
control. DM setting is incorrect. ---
BASIC Green System mode Lit The BASIC program is running. Bit 7 of n+5
Slow
flashing INPUT/LINE INPUT/INPUT$ command standby
(awaiting input), (L)PRINT command standby
(awaiting transmission conditions), or command
input standby. Bit 7 of n+5
(not for INPUT/
LINE INPUT/
INPUT$, and
PRINT
commands)
Quick
flashing Transfer standby for the BASIC program.
(The flashing cycle will be unstable when transfer
of the BASIC program has started.)
---
Not lit At power-on waiting for Ctrl+X Key input. ---
ERR Red System error/
BASIC
error/Battery error Lit An error has occurred in the system or the BASIC
program. Bit 2 of n+5
Flashing Battery voltage has drop, or battery not con-
nected. Bit 6 of n+5
T/R 1 Orange Communications
port 1 data transfer Flashing Communications port 1 is receiving or transmit-
ting data. ---
T/R 2 Orange Communications
port 2 data transfer Flashing Communications port 2 is receiving or transmit-
ting data. ---