
244
List of Error Messages
Section 9-1
System Errors
Operational Errors
B023
FOR WITHOUT NEXT
The NEXT command or the WHILE
command is missing.
Check the FOR...NEXT or
WHILE...WEND combinations.
B024
MISMATCH: WHILE/WEND
The WEND or WHILE command is
missing.
Add a WEND or WHILE command.
B025
UNDEFINED SYMBOL
The character is outside the permissi-
ble range or a label is missing.
Use a character within the permissible
range or check the program label.
B026
INVALID EXPRESSION
An invalid expression has been used.
Correct the expression.
B027
INVALID STATEMENT
An invalid statement has been used.
Correct the statement.
B028
---
Not used.
---
0029
MISMATCH: @IF/ENDIF
@IF and ENDIF do not match.
Check that @IF and ENDIF match.
Error
code
Error message
Probable cause
Corrective measures
Error
code
Error message
Probable cause
Corrective measures
0030
FATAL ERROR: BUS
ERROR
System error. (The ASCII Unit is not
operating properly.)
Turn OFF the power, and then turn ON
again. If the error persists, replace the
Unit.
0031
FATAL ERROR: ADDRESS
ERROR
0032
FATAL ERROR: PRIVILEGE
VIOLATION
0033
FATAL ERROR:
UNINTIALISED INTERRUPT
0034
FATAL ERROR: SPURIOUS
INTERRUPT
0035
FATAL ERROR: ILLEGAL
INSTRUCTION
0036
RTC ACCESS ERROR
Check battery and RTC. Otherwise,
exchange Unit.
0037
FATAL ERROR: MPU IN
LIMP MODE ERROR
Turn OFF the power, and then turn ON
again. If the error persists, exchange
the Unit.
0038
FATAL DEBUG ERROR:
SYSTEM DEBUG ERROR IN
PORT XXXX
0039
---
Not used.
---
Error
code
Error message
Probable cause
Corrective measures
0040
BREAK EXECUTED IN LINE
XXXX
---
---
0041
CANNOT RUN WITH
SWITCH IN STOP
POSITION
Attempted to execute the RUN com-
mand with the switch in the STOP posi-
tion.
Set the switch to START.
0042
USER BREAK
Program stopped by user.
---
0043
FILE TRANSFER
INTERRUPTED
File transfer stopped while executing.
---
0044
PROGRAM MEMORY
ERROR
Corrupted memory.
Toggle the START/STOP switch to ini-
tialize the memory and restart.
0045
---
Not used.
---
0046
---
Not used.
---
0047
---
Not used.
---
0048
---
Not used.
---
0049
---
Not used.
---
Summary of Contents for C200H-ASC11
Page 1: ...C200H ASC11 ASC21 ASC31 ASCII Units Operation Manual Revised June 2000...
Page 2: ...iv...
Page 4: ...vi...