Omron C200H-ASC11, Manual, Page: 106 / 301

97
IOWR/IORD Instruction Specifications
Section 6-5
Writing to the Shared Memory of the ASCII Unit
Item Detail
PC CS1
Operand S
CIO Area CIO 0000 to CIO 6143
Work Area W000 to W511
Holding Bit Area H000 to H511
Auxiliary Bit Area A000 to A959
Timer Area T0000 to T4095
Counter Area C0000 to C4095
DM Area D00000 to D32767
EM Area without
bank E00000 to E32767
EM Area with bank En_00000 to En_32767 (n = 0 to C)
Indirect DM/EM
addresses in binary @D00000 to @D32767
@E00000 to @E32767
@En_00000 to @En_32767 (n = 0 to C)
Indirect DM/EM
addresses in BCD *D00000 to *D32767
*E00000 to *E32767
*En_00000 to *En_32767 (n = 0 to C)
Constants #0000 to #FFFF (binary)
Data Registers ---
Directly addressing
Index Registers ---
Indirect addressing
using Index Regis-
ters ,IR0 to ,IR15
–2048 to +2047 ,IR0 to ,IR15
DR0 to 15, IR0 to IR15
,IR0 to ,IR15+(++)
– (– –) IR0 to IR15
D:
15 4 3 0
Unit No. of the ASCII Unit (0 to F)
CS1-series PCs
0 0 0
D+1:
15 0
No. of Transfer Words (0001 to 0080 Hex
from CIO n + 8) from CPU Unit to ASCII Unit
D: Rightmost 4 digits
D+1 : Leftmost 4 digits
Specified word data of the specified memory
area is transferred to the first word* +
@@
of the
ASCII Unit's shared memory IOWR Area.
*The first word in IOWR Area is set in DM m + 6
allocated in the DM Setup Area.
C:
Details Combination
#00
@@
Can be used in combination
with the ASCII Unit's PC EGET
command. Can also be used
on its own.
S: First source word in CPU Unit memory.
Value
(4-digit hex.)