Omron C200H-ASC11, Manual, Page: 255 / 301

246
List of Error Messages
Section 9-1
Execution Errors
Note The
@
indicates the port number generating the error.
Error
code Error message Probable cause Corrective measures
0062 PROTECTED PROGRAM Program is protected from the NEW
command. When creating a new program using
the NEW command, delete the program
name using the PNAME“ ” command. If
PMEM ON has been specified, execute
the NEW command after executing
PMEM OFF.
@
063 INCOMING DATA HAS
BEEN LOST The data to be received has been lost. Reduce the baud rate or use flow
control.
0064 NOT SUPPORT There is no support.
Automatic transfer was specified even
though the program is not saved in
flash ROM
Check the positions of the OPTION
LENGTH command and other
commands for defining variables.
Check the positions of commands.
0065 FLASHROM ERROR There is an error with the flash ROM, or
nothing has been written to the flash
ROM. Try again or replace the Unit.
0066 VERIFY ERROR Error generated when comparing and
verifying flash ROM If there is no problem with the program
in the user memory (RAM), rewrite the
correct data to the flash ROM using the
ROMSAVE command.
B067 FORMAT ERROR The format or variable specifications for
the PC READ or PC WRITE command
are incorrect, or the number of transfer
words or the specified first transfer
word of the source in the IR/CIO area of
the CPU Unit are incorrect. Check the contents of the PC READ/
PC WRITE command at the ASCII Unit
and words n + 3 and n + 4 in the IR/CIO
area.
0068 --- Not used. ---
0069 PASSWORD INCORRECT The password is incorrect. Input the correct password.
0070 DATA TRANSFER CHECK
SUM ERROR Data sum error generated during data
transfer or nothing written in flash
ROM. Perform the data transfer again.
0071 --- Not used. ---
0072 --- Not used. ---
0073 --- Not used. ---
0074 --- Not used. ---
0075 --- Not used. ---
0076 --- Not used. ---
0077 --- Not used. ---
0078 --- Not used. ---
0079 --- Not used. ---