15
Basic Operating Procedures
Section 1-6
a)
Set the START/STOP switch on the front panel of the Unit to START.
b)
Input RUN from the terminal to run the BASIC program. (The START/
STOP switch on the front panel of the Unit must be set to START first.)
Note
1.
Use one of the following steps to pause the BASIC program.
• Press the Ctrl+X Keys from the terminal.
• Set the START/STOP switch on the front panel of the Unit to STOP.
2.
Use one of the following steps to pause the BASIC program at a particular
line.
• Set a break point from the terminal.
• Place a STOP command in the program.
• Input the RUN TO line number command from the terminal.
Summary of Contents for C200H-ASC11
Page 1: ...C200H ASC11 ASC21 ASC31 ASCII Units Operation Manual Revised June 2000...
Page 2: ...iv...
Page 4: ...vi...