LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X
Page 130 of 187
Appendix A: LVS7000.ini File
The LVS-7000 uses the LVS7000.ini file to configure variable/default values when the program loads. The file is
located in the following directory:
Version 5.6.9:
C:\Users\<username>\AppData\Roaming\Microscan\LVS 7000\Lvs7000.ini
(Pre-5.6.9 Folders)
Windows
®
7:
C:\Users\<username>\AppData\Roaming\Label Vision Systems\LVS 7000\Lvs7000.ini
Windows
®
XP:
C:\Program Files\Label Vision Systems\LVS7000\Lvs7000.ini
Below is a sample LVS7000.ini file with descriptions:
System Configuration Settings:
The SystemConfiguration settings are not user configurable and should not be altered unless requested by
a qualified
Omron Microscan
representative.
CameraPort is designated as 0 for the LVS-7000 software.
ColorMode is for
Omron Microscan
technician use only; it identifies the type of camera being used by the
LVS-7000.
o
ColorMode=0 is a monochrome camera
o
ColorMode=1 is a color camera
DistanceMethod=0 – I7000 shows Encoder Triggers; DistanceMethod=1 – Encoder distance is shown in
inches.
EncoderPort is determined by the encoder board’s serial port in Device Manager.
MaxSpeed is determined by the camera’s top speed
LinesPerInch is the product of dividing the encoder’s pulses per revolution by the circumference of the
encoder wheel. This number is used to correctly gauge label repeat.
PageBreaks are used to let the system know if there are expected non-uniformities of label repeats. 0 =
none expected, 1=expected. If the system expects these repeats then it will not log those as errors once
seen. This is dangerous as the system in this mode can be fooled by a missing label. It can let a missing
label go by and never call out an error.
RIMSBarcodePlacement is an offset for the barcode placement in an LVS-7000 RIMS system from the
camera viewing point.
ShowPrintBarcode is the press Identifier for multiple presses in a LVS-7000 RIMS system.
[SystemConfiguration]
CameraPort=0
ColorMode=1
DistanceMethod=1
EncoderPort=4
MaxSpeed=500
LinesPerInch=341.333
PageBreaks=1
RimsBarcodePlacement=0
ShowPrintBarcode=0
