LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X
Page 161 of 187
Appendix F: AutoScan Program
The AutoScan program allows an operator to simultaneously monitor and analyze up to 16 areas of interest per
job on the web without having to manually move between each area of interest. While a job is running, an
operator can choose to view all of the areas at once, or cycle between full image views of each location. This
allows the operator to keep track of the printing process while the LVS-7000 is inspecting all of the labels for
defects. If defects are detected, AutoScan can help the operator quickly identify what is going wrong by finding the
affected area of the web and going into “Freeze” mode to concentrate on that area of the image for analysis.
Detailed instructions for configuring AutoScan settings are listed below.
The AutoScan program is activated through the dongle assigned to your
Omron Microscan
system, so you must
have an LVS-7000 software license to activate the AutoScan program.
To configure AutoScan settings:
1.
Log in to the LVS-7000 software.
2.
The AutoScan program can be accessed in two areas of the software:
The “AutoScan” checkbox on the Welcome screen (checkbox appears only for systems using external
synchronization):
