LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X
Page 85 of 187
Operate Screen: Ready to Run
Each button on the
Operate Screen
(
Ready to Run)
is described in the table below.
Button Description
Delete This Job
Click to delete the job. Only operators who are granted the
Allow Create NEW
Job
permission is allowed to delete a job. Refer to the
Permissions
section,
within the
Operators
section, for more information on permissions.
View Logs
A Report Log is created for every job. Click this button to view all previous
Reports. (See the Reports chapter for more information on reports.)
Edit Job
Click to change the current job settings. If a password was used, you must enter
the correct password for the job. Only operators who are granted the
Allow
Create NEW Job
permission is allowed to edit a job. Refer to the
Permissions
section, within the
Operators
section, for more information on permissions.
Exit to Main
Click to change to a previously set up job; this will bring you back to the
Welcome Screen where you may select
Load a Job
.
Make Ready
Make Ready operates exactly as if the system were running normally with the
exception that no data is stored and no I/O is triggered. See the section below
titled “Make Ready Mode” for more information.
Continue Last Run
Select this option if you desire to append to the most recent run’s CSV file.
Start New Run
Click to begin a new run and new CSV file.
