LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X
Page 171 of 187
8.
When the settings for each desired tile are complete, perform the steps below in any order:
a.
View all of the tiles at once by clicking either the 2 x 2, 3 x 3 or 4 x 4 buttons.
b.
Cycle through the tiles by clicking the “Cycle” button. This displays a maximized view of each time one at
a time for the specified duration of each tile. Tiles with a hold time set to zero (0) will not appear.
Tiles are cycled row by row, from left to right, starting with the upper left tile:
c.
Click the “Freeze” button to freeze a single tile. Pressing the “Freeze” button does not stop image
updates; it keeps the current tile maximized and will not move to the next tile.
Tip:
Double-clicking on the screen automatically switches between Cycle mode and Freeze mode.
9.
When analysis is complete, shut down the AutoScan program by clicking the red X in the top right corner of
the screen.
10. A “Save Changes” message appears indicating that AutoScan settings have changed and prompts you to
save or not save the changes with the job.
Click “Yes” to save the changes. If a job is running, the changes are stored with the job.
If no job is loaded and the web is running with external synchronization, the changes are stored to a
default file that will load the next time AutoScan is opened from the Welcome screen.
Click “No” to discard the changes.
Click “Cancel” to cancel the message and continue running the AutoScan program.
