LVS-7000 Operations Manual Version 5.6.X
Page 137 of 187
LVS-7000 Operations Manual Version 5.6.X
To store jobs to a different location other than the default, a new path can be specified to the system & it will store
the jobs to that location. It is done exactly like the [ImageSaver]. The default path is =.\Jobs. This stores the Jobs
to the same directory that the I7000.exe is running from to a folder called Jobs.
[Jobs]
Path=.\Jobs
Lumenera:
The Lumenera settings are used for Lumenera specific area scan camera’s and should not be altered unless
requested by a qualified
Omron Microscan
representative.
Exposure is the exposure setting of a Lumenera USB camera.
FixedSpeed is the speed of an external belt or conveyor in feet per minute.
Gain0, Gain1, Gain2 and Gain3 are the four gain values for the 8” Lumenera USB camera sensor.
MaxGainPercent is the maximum allowed gain the LVS-7000 will use to calibrate in the automatic
calibration procedure.
MaxLumeneraSpeed is the maximum frames that a Lumenera USB camera can run at per second.
MultiCamera is turning the camera on or off. The LVS-7000 only supports either one or two cameras.
o
MultiCamera=0 turns off the camera.
o
To turn on a second camera, specify the camera’s serial number (example:
MultiCamera=[camera serial number]
PhotoeyeSkip=0 means that every photoeye trigger is used
o
PhotoeyeSkip=N If N is a positive number, the photoeye will use the first trigger and skip to the
“Nth” of photoeye trigger. For instance, if N=1, the first trigger is used then every other photoeye
trigger that follows is used.
o
PhotoeyeSkip=-N If N is a negative number, the photoeye will not use the first trigger and it will
start at the “Nth” photoeye trigger.
SerialNumber=0. This can be 0 if you have 0 or 1 Lumenera cameras. If you have more than 1 Lumenera
camera, then this is the serial number of the right half of the split screen image.
StrobeDelay=0. Delay the strobe pulse by this number of milliseconds.
StrobeLen=0.1. Length of the strobe pulse in milliseconds.
[Lumenera]
Exposure=0.3
FixedSpeed=0
Gain0=1.0
Gain1=1.0
Gain2=1.0
Gain3=1.0
MaxGainPercent=85
MaxLumeneraSpeed=60
MultiCamera=0
PhotoeyeSkip=0
SerialNumber=0
StrobeDelay=0.0
StrobeLen=0.1
OCR:
Debug=0 is the default and will not save OCR images
o
Debug=-1 saves OCR images as cropped images without scores
o
Debug=1 saves only OCR error images with scores
o
Debug=2 saves all OCR images with scores
MaxHorizontalShift follows the movement of printed characters.
