OmniPod UST400, User Manual

Page: 82 / 202

67
Adjusting Settings 7 7 Adjusting Settings
5. To delete a segment:
a. Select an adjacent segment and press
Edit
.
b. Change the start time or end time so the adjacent segment covers the
segment you are deleting.
c. Optionally, change the value for the resulting longer segment.
d. Press
Save
, then
Save
, then
Done.
Rename a Basal Program
To rename a Basal Program:
1.
Home > Settings > Basal programs
2. Highlight the Basal Program you would like to rename and press
Select
.
3. Highlight
Rename
and press
Select
.
4. Enter the new name (see "Entering text" on page 6) and press
Save
.
Make a new Basal Program from an existing Basal Program
To create a new Basal Program by copying an existing one:
1.
Home > Settings > Basal programs
2. Highlight the Basal Program you would like to copy, and press
Select
.
3. Highlight
Copy
and press
Select
.
Note:
If you already have seven Basal Programs, you must first delete an
existing Basal Program before you can create a copy (see "Delete a Basal
Program" on page 67).
4. Enter a unique name for the new Basal Program (see "Entering text" on page
6) and press
Next
. A screen appears showing the renamed Basal Program
with the original basal segments.
5. To edit or add new segments to create the new Basal Program follow the on-
screen instructions or see "Adding time segments" on page 19.
Delete a Basal Program
You can only delete a Basal Program that is not running; you cannot delete the
active Basal Program. To delete a Basal Program:
1.
Home > Settings > Basal programs
2. Highlight the Basal Program you would like to delete, and press Select .
3. Highlight Delete , then press Select , then press Delete