Checking Your Blood Glucose
82
7
The “Checking” screen appears while the sample is process-
ing (Figure 7-8). The strip-port light turns off when the sam-
ple is accepted.
If
BG sound
is set to
On
, the PDM beeps twice. The result
appears on the screen in about 7 seconds, on average.
6. To mark the result as a control solution result rather than a
blood glucose test:
a. Press
Tag
.
b. Use the
Up/Down Controller
buttons to select
Control
(Figure 7-9), then press
Select
. You can select a second tag
for the test result in the same way.
c. Press
OK
.
7. If you do not want to mark the test as a control solution test,
press
Next
instead of
Tag
.
8. Compare the control solution test result to the range printed
on the test strip vial label. If the result does not fall within the
range, repeat the test. If the result still does not fall within
the range, call Customer Care, 800-591-3455, 24 hours/
7 days (from outside the United States, 781-457-5098).
Do not apply control solution to both edges of the
test strip.
Figure 7-8
Figure 7-9
You can select a maximum of 2 tags.
If the
suggested bolus calculator
feature is turned
Off
,
the
Bolus
soft key appears instead of
Next
.
If you mark a test as a control solution test by mistake,
you can unmark it: Press
Tag
, select
Control
, then
press
Clear
.
Summary of Contents for UST200
Page 1: ...User Guide MyOmniPod com...
Page 3: ...User Guide Model UST200...
