Using the Pod
51
5
Apply the new Pod
Prepare the Pod for applying to your infusion site:
1. To remove the needle cap on the underside of the Pod, pull it
upward (Figure 5-15).
2. Using the pull tabs, remove and discard the white paper
backing from the adhesive tape (Figure 5-16).
3. Apply the Pod to the prepared infusion site. Press firmly to
secure it to your skin.
When you remove the needle cap, a few drops of
insulin should be visible at the end of the needle.
Figure 5-15
Figure 5-16
For the Pod to work best, apply it:
1. Crosswise or at a slight angle on your abdo-
men, hip, upper back, or buttocks (see A)
2. Up and down or at a slight angle on your
upper arm or thigh (see B)
3. At least one inch away from the last site
The Pod’s adhesive keeps it securely in place for up to
3 days. However, if necessary, several products are
available to enhance adhesion. Ask your healthcare
provider about these products. Avoid getting body
lotion, creams, or oils near the infusion site; these
products may loosen the adhesive.
A:
B:
Summary of Contents for UST200
Page 1: ...User Guide MyOmniPod com...
Page 3: ...User Guide Model UST200...
