OmniPod UST200, User Manual

Page: 77 / 194

Using the Personal Diabetes Manager
63
6
3. Insulin to carb (IC) ratio —You can edit existing time seg-
ments and add segments, up to a total of four.
a. To edit an existing IC ratio time segment, choose the seg-
ment, then press Edit (Figure 6-6). Use the Up/Down
Controller buttons to choose a new start time, end time,
and IC ratio. Press Next after each entry.
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, and IC ratio. Press Next after each entry.
c. When you have completed all time segments, press
Done , then Save .
4. Correction factor —You can edit existing time segments and
add segments, up to a total of four.
a. To edit an existing correction factor time segment, choose
the segment, then press Edit . Use the Up/Down Control-
ler buttons to choose a new start time, end time, and cor-
rection factor. Press Next after each entry
b. To add a segment, choose [add new] , then press New .
Use the Up/Down Controller buttons to choose a start
time, end time, and correction factor. Press Next after
each entry.
c. When you have completed all time segments, press
Done , then Save .
5. Reverse correction —Choose On or Off , then press Next .
6. Insulin action (duration) —Use the Up/Down Controller
buttons to choose a duration of insulin action , then press
Done .
7. Press OK .
Figure 6-6