Omnia Omnia.9, Installation And Operation Manual

Page: 56 / 127

48
o Bass Wideband (“BW”) also employs a sidechain filter, but one that contains the
entire audio spectrum, so the bass becomes more compressed when the entire mix
is above threshold. This mode is most useful when loudness is your primary
processing goal, as it could allow full-­‐scale bass audio in circumstances when there
is no mid-­‐range or treble audio present. However, there will be less bass present in
situations when there other frequencies are present.
Wideband AGC3 Menu
The Wideband AGC3 menu operates in the same manner as Wideband AGC2, with all of the same
controls, but cannot be located before the multiband section. It can be used only after the
multiband section, or in the Bass Only or Bass Wideband modes.
Band Mix Menu
The Band Mix Menu allows you to adjust the final output of each band after all Wideband and
Multiband processing has been applied. This is the final point of adjustment before the audio
reaches the Final Clipper (FM core) or Final Limiter (HD and Streaming Cores).
Each Band Level control has a range of -­‐12 to +12dB in one-­‐quarter dB increments.
o
The Band Mix (coupled) allows you to adjust the output of all bands in the Band Mix section
simultaneously and by and equal amount.