Omnia Omnia.9, Installation And Operation Manual

Page: 40 / 127

32
The Multiband meter window shows the levels and action of the AGC, limiter, and noise reduction
sections for each band (ranging from 2 to 7 depending upon the preset employed).
As is the case with the AGC metering section, the scale will change based upon the settings
of various multiband controls.
The Multiband AGC level in each band is indicated by a bright yellow bar. The multiband
limiter for each band is represented by a bright red bar that flashes beneath the AGC level.
The multiband noise reduction for each band is shown by a dark red bar that appears to
drop down from the very top of the meter.
If the Wideband AGC2 compressor is enabled and placed after the multiband section, or it is
used in one of its Bass modes, its meter will be displayed separately to the right of the
multiband display. The Wideband AGC3 meter will appear after the multiband section as
well if it has been enabled.
Multiband
AGC
Multiband
Limiter
Multiband
Noise
Reduction
WB AGC2
After
Multiband