Omnia Omnia.9, Installation And Operation Manual

Page: 18 / 127

10
Oscilloscope in Display 3, and the MPX Output of the FFT Spectrum Analyzer in Display 4.
Details of how to create and customize display options are explained in detail in the Display
Settings section of the manual.
Understanding the User Interface and Display
Omnia.9’s User Interface (UI) is set up in “layers” or “tiers.”
The first tier always contains the highest level (most general) menu options in the form of buttons.
When selected, these buttons take you to a second tier of menu options, which are also buttons,
but of a more specific nature. The third tier is made up of Omnia.9’s controls.
Non-­‐Expert Navigation Mode
By default, Omnia.9 powers up in the “Non-­‐Expert” navigation mode.
In this mode:
The top portion of the screen is devoted to the display windows.
The bottom portion of the screen shows the buttons or controls for the current tier.
In between these two areas is a navigation bar that shows you exactly where you “are”
within Omnia.9, along with navigation arrow buttons that let you go forward or backward to
most places you have visited in the fourth tier.
Selecting and holding down either of the arrow buttons will bring up a list of these places so
you can re-­‐visit them directly.
Double-­‐tapping on any of the controls brings up a magnified view that has two large sliders
– one for a “course” adjustment and one for a “fine” adjustment. Once you’ve made your
adjustments, tap “Done” to return to the previous display of all the controls for the tier
you’re in.
Tier 1 Tier 2 Tier 3
Tier 3
Controls
Navigation
Arrows