92
Specifications
Preliminary specifications at the time this manual was printed are provided here.
Frequency Response
+/-‐ 0.5dB 20Hz to 15kHz; 17.5kHz in extended mode.
Signal-‐to-‐Noise Ratio
Greater than -‐80dBu de-‐emphasized, 20Hz to 15kHz.
System Distortion
Less than 0.01% THD below pre-‐emphasis; inaudible above.
Stereo Separation
65dB minimum, 20Hz to 15kHz; 70dB typical.
Digital Output Level
Adjustable from -‐24dbFS to 0.0DBFS in 0.1 dB increments.
Stereo Baseband Output
Adjustable from -‐24.0dBFS to 0.0dBFS in 0.1 dB increments.
A/D Conversion
Crystal Semiconductor C55361, 24-‐bit 128x over-‐sampled.
Delta sigma converter with linear-‐phase and anti-‐aliasing filter.
Pre-‐ADC anti-‐alias filter with high-‐pass filter at <10Hz
D/A Conversion
Crystal Semiconductor CS4391, 24-‐bit, 128x over-‐sampled.
External sync input
Per AES11 Digital Audio Reference Signal (DARS), reference for digital output sample rate.
External Sync Range
44.1 or 48kHz.
Inputs/Outputs
Balanced, EMI-‐filtered, L/R analog input and output connectors.
AES Reference Input, Main Digital Input, Aux Digital Input, Main FM Output 1, Main FM
Output 2, and Aux Output on XLR connectors, including recognition of external sync signal
on AES Reference Input. Main and Auxilliary digital inputs accept sample rates between
32kHz – 96kHz and have signal rate converters.
Shared Ethernet/Livewire RJ-‐45 port supporting 100 and 1000 BASE-‐T Ethernet.
Power Requirements
100-‐264 VAC, 47-‐63Hz, auto-‐sensing.
Summary of Contents for Omnia.9
