31
Omnia.9’s Processing Meters
Understanding the Processing Meters Display
The Processing Meters Display provides a tremendous amount of information about what’s going
on inside each of Omnia.9’s processing cores, but in a very efficient and easy-‐to-‐read manner.
In the FM processing core, meters are provided for monitoring input levels, Input AGC, Wideband
AGC1, Multiband AGC and Limiters, Multiband Noise Reduction, Multiband Stereo Enhancement,
Wideband AGC2 sections, post-‐multiband output, MPX output, and individual left and right outputs
In the HD and Streaming cores, meters for the final look-‐ahead peak limiters and the final output of
the processing core are added, while the MPX output and left and right output meters are
eliminated.
The ITU BS.1770 Input meters indicate the level of the unprocessed source audio coming into
Omnia.9 with floating peak indicators above each bar.
The AGC meter window shows the levels and action of the Input AGC and the Wideband AGC1
compressors. It also shows the level of the Wideband AGC2 section when it is enabled and
positioned before the multiband section.
Depending upon the settings of the various Input and Wideband AGC1/AGC2 controls, the
scale to the left of the meter can display levels below threshold (positive numbers) as well
as levels above threshold (negative numbers). When the meters dip down below “0” the
compressors are above threshold and therefore in a state of gain reduction. When they rise
above “0” they are below threshold and in a state of gain increase. The combination of
Input AGC, AGC1, and AGC2 gain is added together to determine the total amount of AGC
gain in place.
The Input AGC levels are indicated by a bright yellow bar. The Wideband AGC1 levels are
shown as a dark orange bar extending below the Input AGC meter. Wideband AGC2 levels
(if this compressor is situated before the multiband section) are shown as a second, darker
orange bar below the AGC1 meter.
Input AGC
WB AGC1
WB AGC2
Input
Summary of Contents for Omnia.9
