![background image](http://html1.mh-extra.com/html/omega/sbr-ew100/sbr-ew100_user-manual_4033456065.webp)
4-24
IMSBR08-E2
Dot model
Syntax
U A p 1 , p 2
<terminator>
p 1
Record position selection
Z E R O
0% position
F U L L
100% position
H y s t e r e s i s
The difference in the record position
according to the operating direction of
the printer carriage
p 2
Record position adjustment value
When p1 =
H y s t e r e s i s
An integer between –7 to 7
When p1 =
Z E R O
SBR-EW100: An integer between 0 and 15
SBR-EW180: An integer between 0 and 50
When p1 =
F U L L
SBR-EW100: An integer between –30 to 30
(reference value: 1000)
SBR-EW180: An integer between –50 to 50
(reference value: 1800)
Example
Adjust the 100% position. Set the record position
adjustment value to 25.
U A F U L L , 2 5
Description • Carry out the adjustment in the following order: P1
= Hysteresis, ZERO, and then FULL.
• Check the recorded result and correct the record
position adjustment value.
• To end the adjustment, execute the UY0 command.
If you do not end the adjustment, you cannot
change the execution mode.
• The unit for p2 is dot (0.1 mm).
YE
Exits from Basic Setting mode.
When the YE command is executed, communication is dropped.
Syntax
Y E p 1
<terminator>
p 1
Apply/Discard the settings
S T O R E
Apply the settings
A B O R T
Discard the settings
Example
Apply the basic settings.
Y E S T O R E
Description Applies the settings changed with the basic setting
commands.
XE
Exits from Basic Setting mode.
Communication is not dropped when the XE command is executed.
Syntax
X E p 1
<terminator>
p 1
Apply/Discard the settings
S T O R E
Apply the settings
A B O R T
Discard the settings
Example
Apply the basic settings.
X E S T O R E
Description The settings specified by the following commands and
saved using the XE command take effect after the
recorder is power cycled.
YS, YB, YA, YN, YD, YQ, and YK
4.5 Basic Setting Commands
Summary of Contents for SBR-EW100
Page 1: ...IMSBR08 E2 SBR EW100 EW180 Recorder Communication Interface User s Manual...
Page 2: ......
Page 99: ...3 2002...