manualshive.com logo in svg

Olympus E10 - CAMEDIA E 10 Digital Camera SLR, Instructions Manual

Share
Download
Olympus E10 - CAMEDIA E 10 Digital Camera SLR Instructions Manual Download Page 191

189

CARD ERROR

You cannot store 
pictures, play back 
images, or delete 
images from the card.

Remove the card, wipe clean the 
electrical contacts, insert the card, and 
then try again. If the message is 
displayed again, the card can no 
longer be used.
You may be able to use the card again 
if you format it. However, formatting 
the card will erase all images stored 
on the card.

WRITE 
PROTECT

UNFORMATED
CARD

The card is protected 
with an adhesive seal, 
or a folder on the card 
has been designated 
“read-only”. The card 
has been selected only 
for playback, so it 
cannot be used for 

taking pictures, images 
cannot be deleted, and 
it cannot be initialized.

Card is not formatted 
or is damaged.

If the card is protected with an 
adhesive seal, remove the seal, or if 
the card has been selected for 
playback only, cancel the playback-
only selection. If this does not solve 
the problem, the card is operating 
abnormally. Try to transfer the images 
to a computer, or try to copy the 
images to another card installed in the 
camera. After copying the images, try 
to format the card again.

CARD COVER 
OPEN

Card compartment 
cover is open.

Insert the card and lock the card 
compartment cover.

NO CARD

Card is not present.

Insert the card in the camera.

Format the card. Formatting the card 
will erase all images stored on the 
card. On the arrow pad, press      to 
select YES, and then press the        
button to format the card.

NO PICTURE

Playback cannot be 
executed because 
there are no pictures 
stored on the card.

Make sure that a card that contains 
images is inserted, or take a picture.

  

No display

Control 
Panel

 Monitor

 Viewfinder

Explanation

Solution

Appendix 5: Camera Error Messages

If a problem occurs with a memory card, a message will be displayed in the control panel
and the monitor. When a memory card error message is displayed, first remove the card
and then insert it again. If the error message occurs again, refer to the table below to
solve the problem.

Downloaded From camera-usermanual.com

Summary of Contents for E10 - CAMEDIA E 10 Digital Camera SLR












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands