manualshive.com logo in svg

Olympus E10 - CAMEDIA E 10 Digital Camera SLR, Instructions Manual

Share
Download
Olympus E10 - CAMEDIA E 10 Digital Camera SLR Instructions Manual Download Page 165

163

11

9

Press the 

 button.

The print reserve icon and message are
displayed on the monitor while the images
are being selected for printing. When the
print reserve selection is completed, the
first displayed image appears.

Taking a picture after selecting index printing

If you take more pictures after selecting all the pictures on a card for index printing,
the exclamation mark will appear to warn you that not all pictures on the card are
selected for index printing. Repeat the procedure above to ensure that all pictures
on the card are selected for index printing.

Cancelling all pictures selected for index printing

At Step 6 above, on the arrow pad press 

 to move the

green highlight to CLEAR ALL. Then follow the remaining
steps to complete the procedure.

Index Printing

Index printing prints several images arranged as shown. The
number of images printed on a sheet is determined by the
printer in use.

Note
• Selecting a large number of pictures for printing could take a long time. Before you start selecting

a large batch of pictures for printing, check the battery check in the viewfinder and make sure
sufficient battery power is available, or if possible, connect the optional AC adapter. While selecting
pictures for printing, never switch the camera off or open the memory card cover.
If you are interrupted during picture selection for printing, you will have to start again.

• Images stored as RAW data cannot be selected for printing. (

➞

 131)

• The level of DPOF compatibility is different for some printers and you could experience some

problems in printing pictures selected for printing with the print reserve features on the camera.
(

➞

 166)

9

Downloaded From camera-usermanual.com

Summary of Contents for E10 - CAMEDIA E 10 Digital Camera SLR












































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands