OLS CASY TT, Operator'S Manual

Page: 60 / 64

60
CASY TT Operator‘s Guide
Format of Serial Data Transfer
Row Name of Parameter Format Comments
1 Serial Number @@@@@@@@@@@@
2 Setup Name @@@@@@@@@@
3 Setup Number ## 00 – 19
4 Time ##:## 24 h format
5 Date dd.mm.yyyy or mm/dd/yyyy depending on the selected format
6 Dilution Factor #.###e+##
7 Measuring Cycles ## 1 – 10
8 Sample Volume (µl) ###.## corrected based on volume calibra-
tion
9 Mode of Aggregation Correction # 0=Off, 1=Manual, 2=Auto
10 Manual Aggregation Correction
(fl)
#.###e+## single cell volume
11 Percent Mode # 0=Off, 1=Viab, 2=%Cnt, 3= %Vol
12 Debris Mode # 0=Off, 1=On
13 Capillary Diameter (µm) ###
14 X-Axis Scale (µm) ###
15 Left Normalization Cursor (µm) ###.##
16 Right Normalization Cursor (µm) ###.##
17 Left Evaluation Cursor (µm) ###.##
18 Right Evaluation Cursor (µm) ###.##
19 Y-Axis #### Auto or 10 – 7500
20
– 419
Counts in the 400 Size Channels #####
420 Counts ########## within evaluation cursor range
421 Concentration Range # 0=Ok, 1=Too High
422 Counts > Upper Scaling Limit/ml #.###e+##
423 Aggregation Factor ##.###
424 Counts/ml #.###e+## within evaluation cursor range*
425 Total Counts/ml #.###e+## within normalization cursor range*
426 Viable Cells/ml #.###e+## within evaluation cursor range*
427 Total Cells/ml #.###e+## within normalization cursor range*
428 Cell Debris/ml #.###e+## on left side of left normalization
cursor*
429 Volume/ml in fl #.###e+## within evaluation cursor range
430 Total Volume/ml in fl #.###e+## within normalization cursor range *
431 %Counts ###.## based on normalization
range=100%*
432 %Viability ###.## based on normalization
range=100%*
433 %Volume ###.## based on normalization
range=100%*
434 Mean Volumen in fl #.###e+## within evaluation cursor range
435 Peak Volumen in fl #.###e+## within evaluation cursor range
436 Mean Diameter in µm ###.## within evaluation cursor range
437 Peak Diameter in µm ###.## within evaluation cursor range
438 Check Sum XXXXXXXX 4 bytes hexadecimal
Depending on your setup settings, some data tagged with an asterisk (*) are output as
not
calculated
.
Data Output via the Serial Interface