33
Operation of CASY TT
MAIN MENU – Edit Setup
Output parameters
Interface:
You can specify through the interface, whether after pressing
, the data should be
output through the parallel output –
Par
, through the serial output –
Ser
or through both
simultaneously –
P + S
. The
P + S
setting enables you print the
data, while simultaneously transferring it to a connected computer. The connected
printer must be PCL capable. To export data to a PC,
CASY excell
is delivered together
with the system, a program which exports and displays your measuring results directly to
MS-Excel. More precise details on the serial transfer of data can be found in the Appendix
(see Chapter 8.1).
P.Feed:
This parameter can be either
On
and
Off
. When set to
On
, a page is output to the printer
after each print command. When set to
Off
, the first page is sent to print only when full.
For outputting numerical results (
Graphic
to
Off
) and printing setups, this setting
allows up to three printouts to fit onto one page. You can print the page at any time in
advance with the
Page Feed
command on your printer. When the size distribution is
printed (
Graphic
to
On
),
P.Feed
is ignored.
Print Mode:
The print mode can be set to either
Manual
or
Auto
. When set to
Auto
, the data is auto-
matically output after every measurement. When set to
Manual
, you must press
after a measurement to output the data.
Graphic:
This setting determines whether the size distribution is also to be printed as data is out-
put to the printer. The only possible settings are
On
and
Off
.
You can stop parameter input at any time by pressing either
ENTER
or
CANCEL
. If you press
CAN-
CEL
, your entries are discarded and the previous settings are restored. Pressing
will printout
all setup parameters for reference purposes. Pressing
ENTER
gives you the option of saving your
new settings in one of the 20 setups.
A warning message will appear if a measurement is shown in the display and you have changed
one of the measuring parameters
X-axis
,
Sample Vol
or
Cycles
. You will be reminded that the
current measuring result may be lost if you confirm the message with
ENTER
. At this point, you
can press
CANCEL
to return to the setup screen. The changes you have made to the measuring
parameters will then be reset.
