27
PROGRAMMING
7.
Enter the relevant telephone number - max. 32 digits
- on the numeric keypad e.g. 0125 230025. (Tele-
phone number entry is optional).
If the display shows a previously set number, you can
confirm it by pressing START, or replace it with a new
number by typing the new number on the numeric
keypad and pressing START.
If permission for this operation is denied, this means
that the selected key has already been associated
with a program key.
To delete a setting, press CLEAR.
To make a correction, move the cursor to the digit to
be changed (using the < or > keys) and overwrite it
with the new digit.
You can insert pauses, leave a blank between one
digit and another, request acknowledgement of an
answering tone, etc. (as explained in step 5).
8.
Press START to confirm the number set.
9.
Enter the correspondent’s name - max. 30 alphanu-
meric characters - e.g. Clare (name entry is op-
tional).
Each character is entered by pressing the
∨∨∨∨∨
or
∧∧∧∧∧
key to scroll through the entire set of alphanumeric
characters until the desired character is displayed
and then by pressing the CONFIRM key to confirm
selection. (For a complete list of the alphaumeric
characters available, refer to the “CHARACTER SET
TABLE” chapter).
To delete an entire setting, press CLEAR.
If you want to delete one of the characters set, move
to the character to be changed (using the < 0 > keys)
and overwrite it with the correct one.
If you want to leave a blank between one character
and the next, use the > key to move the cursor one
place forward.
S T . 1 - T O U C H N O .
T E L
0 6 : 0 1 2 5 2 3 0 0 2 5
S T . 1 - T O U C H N O .
N A M E A
0 6 :
S T . 1 - T O U C H N O .
N A M E A
0 6 : C L A R E
☞
