24
PROGRAMMING
3.
Press START to start storing the name, e.g. P.I.S.A.
S.p.A..
Each character is entered by pressing the
∨∨∨∨∨
or
∧∧∧∧∧
key to scroll through the entire set of alphanumeric
characters until the desired character is displayed
and then by pressing the CONFIRM key to confirm
selection.
(For a complete list of the alphaumeric characters
available, refer to the “CHARACTER SET TABLE”
chapter).
If you want to leave a blank between one character
and the next, press the > key to move the cursor one
position forward
To delete an entire setting, press CLEAR.
If you want to delete one of the characters set, move
to the character to be changed (using the < or > key)
and overwrite it with the correct one.
4.
To confirm the name set, press START.
The display shows the next function on the menu.
Having stored the sender’s name, the facsimile is
automatically set for programming the next function.
Move straight on to step 3 of the “SETTING PASS-
WORDS” section, if you want to continue program-
ming the remaining functions on the menu, or:
press STOP to quit the menu .
S E N D E R ‘ S N A M E S T O R I N G / A
S E N D E R ‘ S N A M E S T O R I N G / .
P . I . S. A . S . p . A .
S T O R I N G D A T A
S T O R I N G M A I L B O X P A S S W O R D
