Olivetti JET-LAB 600@, User Manual

Page: 50 / 130

F
ACSIMILE
35
RECEPTION MODES ...
In any non-manual RX MODE, if you raise the
receiver immediately, you must press the START key
to begin receiving the fax.
Manual reception ...
Procedure:
i.e.:
1.
Ensure that the display shows the initial waiting
mode and the date and time.
RX ON FAX 100%
09-10-99 14:09
2.
Press the RX MODE key until manual reception is
selected.
MANUAL 100%
09-10-99 14:09
3.
When the phone rings, lift the receiver to connect
to the telephone LINE.
TEL. CALL
4.
As soon as you hear the fax tone or when asked
to do so by the caller, press the START key.
CONNECTION
5.
Replace the handset. The fax machine begins
receiving the message and the display shows
information regarding the incoming message,
including the sender’s fax number or (if
programmed) his name.
6.
On completion, the message “RX COMPLETED”
is shown on the display for a few seconds, and
then the fax machine returns to the initial waiting
mode.
MANUAL 100%
09-10-99 14:09
If the caller called just to speak, replace the receiver
at the end of the conversation.
If your telephone installation has several sockets
and the connected telephone is not near the fax
machine, you can enable the fax machine for remote
reception (REMOTE) provided that the telephone
works with tone dialling (multi-frequency):
•
Connect to the line by lifting the handset.
•
Press the * key on the telephone, followed by the
remote control code. Remember that the code
must be the one previously programmed (see
“Changing the remote control code” in “For
more sophisticated use”).
Automatic reception ...
The fax machine receives documents automatically
without any intervention.
The fax machine is already programmed to receive
documents in automatic mode. However, if it is
programmed differently, press the RX MODE key until
the display shows “ RX ON FAX ”.
Automatic reception with call type
recognition ...
You have programmed the fax machine by pressing
the RX MODE key to receive in this mode (the display
must show “ FAX/PHONE”).
The behaviour of the fax machine in this reception
mode will depend on the caller. This procedure is
illustrated in the following diagram: