Olivetti d-Copia 600, Service Manual

Page: 258 / 454

1-6-28
Yes
No
Start
Enter maintenance mode.
Enter 402 using the numeric keys.
Press the start key.
Press the start key to output a test
pattern using A3/11" x 17" paper.
Press the start key.
The new setting is stored.
Setting range (initial setting)
Printer leading edge margin: 0.0 to +10.0 (+3.0)
Printer left margin: -3.4 to +10.0 (+3.2)
Printer right margin: -5.0 to +10.0 (+3.2)
Printer trailing edge margin: -5.0 to +10.0 (+5.0)
Printer trailing edge margin for duplex copying
(second face): -5.0 to +10.0 (+5.0)
Increasing the value makes the margin wider and decreasing
it makes the margin narrower.
Changing the value by 1 moves the margin by 0.1 mm for all.
Select the items
to be adjusted on the touch panel.
Are the margins correct?
Change the setting using
the cursor up/down keys.
Press the interrupt key.
Yes
No
Press the stop/clear key.
Exit maintenance mode.
End
Proceed to
another mode?
Touch panel display
LEAD: Printer leading edge margin
A: Printer left margin
C: Printer right margin
TRAIL: Printer trailing edge margin
TRAIL (DUP): Printer trailing edge margin
(8-4) Adjusting the margins for printing
Make the following adjustment if the margins are not correct.
<Caution>
Check the copy image after the adjustment. If the margins are still incorrect, perform the above adjustments in mainte-
nance mode.
<Procedure>
Figure 1-6-54
U402
U404
(P. 1-6-95)
U403
(P. 1-6-55)
Ejection direction
(reference)
Printer trailing edge margin
for duplex copying (3 1.0 mm)
+
-
(3 1.0 mm)
+
-
(3 1.0 mm)
+
-
(3 1.0 mm)
+
-
(3 1.0 mm)
+
-
Printer leading edge margin
Printer
left margin
Printer
right margin
Printer trailing edge margin
Duplex copy mode
(second face, A3/11" x 17")
Normal copy mode
(A3/11" x 17")
Service Manual Y104350-7