Olivetti d-Copia 600, Service Manual

Page: 173 / 454

1-5-17
(21)
A paper jam in the
paper conveying sec-
tion is indicated dur-
ing copying (jam in
registration/transfer
section).
Jam code 34 Broken feed switch 1 actua-
tor. Check visually and replace feed switch 1 if its actuator is broken.
Defective feed switch 1. Run maintenance item U031 and turn feed switch 1 on and off
manually. Replace feed switch 1 if indication of the corresponding
sensor on the touch panel is not displayed in reverse.
Defective registration
switch. Run maintenance item U031 and turn the registration switch on
and off manually. Replace the registration switch if indication of
the corresponding sensor on the touch panel is not displayed in
reverse.
(22)
A paper jam in the
paper conveying sec-
tion is indicated dur-
ing copying (jam in
registration/transfer
section).
Jam code 35 Broken feed switch 1 actua-
tor. Check visually and replace feed switch 1 if its actuator is broken.
Defective feed switch 1. Run maintenance item U031 and turn feed switch 1 on and off
manually. Replace feed switch 1 if indication of the corresponding
sensor on the touch panel is not displayed in reverse.
Defective registration
switch. Run maintenance item U031 and turn the registration switch on
and off manually. Replace the registration switch if indication of
the corresponding sensor on the touch panel is not displayed in
reverse.
(23)
A paper jam in the
fuser section is indi-
cated during copying
(jam in fuser section
1).
Jam code 40 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off
manually. Replace the exit switch if indication of the correspond-
ing sensor on the touch panel is not displayed in reverse.
(24)
A paper jam in the
fuser section is indi-
cated during copying
(jam in fuser section
2).
Jam code 41 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off
manually. Replace the exit switch if indication of the correspond-
ing sensor on the touch panel is not displayed in reverse.
(25)
A paper jam in the
fuser section is indi-
cated during copying
(jam in fuser section
3).
Jam code 42 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off
manually. Replace the exit switch if indication of the correspond-
ing sensor on the touch panel is not displayed in reverse.
(26)
A paper jam in the
fuser section is indi-
cated during copying
(jam in fuser section
4).
Jam code 43 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off
manually. Replace the exit switch if indication of the correspond-
ing sensor on the touch panel is not displayed in reverse.
(27)
A paper jam in the
fuser section is indi-
cated during copying
(jam in fuser section
5).
Jam code 44 Defective exit switch. Run maintenance item U031 and turn the exit switch on and off
manually. Replace the exit switch if indication of the correspond-
ing sensor on the touch panel is not displayed in reverse.
Problem Causes/check procedures Corrective measures
Y104350-7 Sevice Manual