Olivetti d-Copia 600, Service Manual

Page: 323 / 454

1-6-91
Enter maintenance mode.
Place an original on the document
processor and make a test copy.
Yes
No
Start
End
Exit maintenance mode.
Press the stop/clear key.
Is the image correct?
Enter 070 using
the numeric keys.
Press the interrupt key.
Setting range (Initial setting)
CIS MAIN ADJ: -25 to +25 (0)
CONVEY SPEED: -25 to +25 (0)
CIS SUB ADJ: -15 to +10 (0)
Changing the value by 1 changes
the magnification by 0.1%.
(CIS MAIN ADJ/CONVEY SPEED)
Changing the value by 1 changes
the magnification by 0.05%.
(CIS SUB ADJ)
Change the setting.
For copy example 1, increase the
value using the cursor up key to
make the copy image longer.
For copy example 2, decrease
the value using the cursor down
keys to make the copy image
shorter.
Press the start key.
Press the start key.
The new setting is stored.
Select the item to be adjusted
on the touch panel.
Touch panel display
CIS MAIN ADJ: Maginification in the main direction
CONVEY SPEED: Original conveying motor
speed adjust
CIS SUB ADJ: Maginification in the auxiliary
direction
(5) Adjusting the DP magnification
Adjust magnification in the auxiliary scanning direction if magnification is incorrect when the document processor is used.
.
<Caution>
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
<Procedure>
Figure 1-6-180
U053
(P. 1-4-16)
U403
(P. 1-6-55)
U402
(P. 1-6-28)
U066
(P. 1-6-54)
U070
Front (CCD adjustment)
Back (CIS adjustment)
U071
(P. 1-6-93)
U404
(P. 1-6-95)
U070
U071
(P. 1-6-93)
U404
(P. 1-6-95)
U065
(P. 1-6-51)
U034
(P. 1-6-25)
Auxiliary
scanning
direction
Original
Main scanning
direction
Copy
example 1
Copy
example 2
Y104350-7 Sevice Manual