Olivetti d-Copia 600, Service Manual

Page: 167 / 454

1-5-11
(2)
A paper jam in the
paper feed section is
indicated during
copying (no paper
feed from cassette
1).
Jam code 10 Paper in cassette 1 is
extremely curled. Change the paper.
Check if the paper feed pul-
ley, forwarding pulley and
separation pulley of cas-
sette 1 are deformed. Check visually and replace any deformed pulleys.
Broken feed switch 2 actua-
tor. Check visually and replace the upper feed sensor if its actuator is
broken.
Defective feed switch 2. Run maintenance item U031 and turn feed switch 2 on and off
manually. Replace feed switch 2 if indication of the corresponding
sensor on the touch panel is not displayed in reverse.
Check if paper feed motor 1
malfunctions. Run maintenance item U030 and select paper feed motor 1 on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Electrical problem with
paper feed motor 1. Check (see page 1-5-58).
(3)
A paper jam in the
paper feed section is
indicated during
copying (no paper
feed from cassette
2).
Jam code 11 Paper in cassette 2 is
extremely curled. Change the paper.
Check if the paper feed pul-
ley, forwarding pulley and
separation pulley of cas-
sette 2 are deformed. Check visually and replace any deformed pulleys.
Defective timing switch 1. Run maintenance item U031 and turn the timing switch 1 on and
off manually. Replace the timing switch 1 if indication of the corre-
sponding sensor on the touch panel is not displayed in reverse.
Check if paper feed motor 2
malfunctions. Run maintenance item U030 and select paper feed motor 2 on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Electrical problem with
paper feed motor 2. Check (see page 1-5-58).
(4)
A paper jam in the
paper feed section is
indicated during
copying (no paper
feed from cassette
3).
Jam code 12 Paper in cassette 3 is
extremely curled. Change the paper.
Check if the paper feed pul-
ley, forwarding pulley and
separation pulley of cas-
sette 3 are deformed. Check visually and replace any deformed pulleys.
Defective timing switch 2. Run maintenance item U031 and turn the timing switch 2 on and
off manually. Replace the timing switch 2 if indication of the corre-
sponding sensor on the touch panel is not displayed in reverse.
Check if paper feed motor 3
malfunctions. Run maintenance item U030 and select paper feed motor 3 on the
touch panel to be turned on and off. Check the status and remedy
if necessary.
Electrical problem with
paper feed motor 3. Check (see page 1-5-58).
Problem Causes/check procedures Corrective measures
Y104350-7 Sevice Manual