Olivetti d-COPIA 255MF Operation Manual Download Page 211

Page: 211 / 513

5-7

Operation on the Machine > Loading Paper in the Multi Purpose Tray

Loading Paper in the Multi Purpose Tray

For details of the supported paper sizes, refer to the following:

Paper Appropriate Paper (12-15)

For the paper type setting, refer to the following:

Media Type Setting (8-14)

Be sure to use the multi purpose tray when you print on any special paper.

The capacity of the multi purpose tray is as follows.

•

A4 or smaller plain paper (80 g/m

), recycled paper or color paper: 100 sheets

•

Thick paper (220 g/m

): 10 sheets

•

Thick paper (157 g/m

): 10 sheets

•

Thick paper (120 g/m

): 25 sheets

•

Thick paper (104.7 g/m

): 25 sheets

•

A4 or smaller plain paper (80 g/m

), recycled paper or color paper: 25 sheets

•

Hagaki (Cardstock): 20 sheets

•

Envelope DL, Envelope C5, Envelope #10(Commercial#10), Envelope Monarch, Youkei 4, Youkei 2: 5 sheets

•

OHP film: 10 sheet

Open the multi purpose tray.

IMPORTANT

• If you are using a paper weight of 106 g/m

or more, set the media type to Thick and set the weight of

the paper you are using.

• Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner

tray may cause a paper jam.

NOTE

• When you load custom size paper, enter the paper size by referring to the following:

[Multi Purpose Tray] (8-10)

• When you use special paper such as transparencies or thick paper, select the media type by referring to the

following:

Media Type Setting (8-14)

Summary of Contents for d-COPIA 255MF

































































































































































































































































































































































































































































































































Search results

Summary of Contents for d-COPIA 255MF

Reviews:

Related manuals for d-COPIA 255MF

Brands by name

Popular brands

Olivetti d-COPIA 255MF, Operation Manual

Search results

Summary of Contents for d-COPIA 255MF

Reviews:

Related manuals for d-COPIA 255MF

Brands by name

Popular brands