Olivetti d-Color 201Plus, User Manual

Page: 386 / 453

6 Network Scan/Fax/Network Fax Operations
6-100 d-Color MF350/250/201Plus
Line Settings
% Specify transmission settings for the line.
!
Detail
To execute [Check Dest. & Send], the destination must have its fax number registered.
Item Description
Overseas TX Specifies a slow transmission speed to send a Fax to an area in bad commu-
nication.
ECM OFF Cancels ECM mode and cuts communication time to send data.
The ECM mode is an error request repeat method communication defined by
ITU-T (International Telecommunication Union). As faxes equipped with the
ECM mode communicate by checking if the sent data has an error, they can
prevent image blurring by the noise on the phone line.
V. 34 OFF V. 34 is a communication mode used for Fax communication of super G3.
There are cases when the communication is not possible in super G3 mode
depending on the telephone line conditions when the recipient’s machine or
this machine is connected to the line via a private branch exchange.
It is recommended that you set V. 34 to off before sending a Fax. This ma-
chine automatically returns to V. 34 mode when it completes transmission.
Check Dest. & Send A Fax is sent only after a comparison of the specified Fax number with the
Fax number information (CSI) for the recipient’s machine indicates a match.
This prevents misdirected transmissions since a transmission error occurs if
the numbers do not match.
Select Line Select [Line 1] or [Line 2] to send a Fax if the fax multi line is installed. Specify
a line for transmission.