Olicom CrossFire 8730, Reference Manual

Page: 89 / 234

75
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
Priority Threshold
The highest Token-Ring frame priority that will go to the low priority transmit
queue. Possible values are 0–7. The default value is 3).
Min Transmit Priority
The minimum Token-Ring frame priority that will be used for transmits. Possible
values are 0–6. The default value is 4.
Error High Threshold
This field is only valid when Forwarding Mode is set to auto, and is used to force
a port to store & forward mode when the percentage of errors detected in the
Sampling Interval is more than the error high threshold. Possible values are 0–100
percent. The default value is 10 percent.
Error Low Threshold
This field is only valid when Forwarding Mode is set to auto, and is used to return
a port to cut-through mode when the percentage of errors detected in the Sampling
Interval is less than the error low threshold. Possible values are 0–100 percent. The
default value is 1 percent.
Error Sampling Interval
This field is only valid when Forwarding Mode is set to auto, and specifies a
sampling period in minutes. The sampling period is used when counting errors to
determine a ports forwarding mode. Possible values are 1–60 minutes. The default
value is 10.
Cfg Loss Threshold
Configuration loss occurs when a port completes a connection, allows data traffic
to flow, and subsequently closes. This threshold is used to control the number of
configuration losses that can occur within the Cfg Loss Sampling Interval. When
the threshold is exceeded, the port is disabled and must be enabled via this screen
or an SNMP manager. Possible values are 1–100. The default value is 8.
Cfg Loss Sampling Interval
Specifies a sampling period in minutes. The number of configuration losses occurring
within this interval is compare to the Cfg Loss Threshold to determine if a port
should be disabled. Possible values are 1–60 minutes. The default value is 10.
➽
Note: If you change any configuration parameters of a connected port, the port will
close and reopen and you will lose all address information and statistics for that
port.