Olicom CrossFire 8730, Reference Manual

Page: 107 / 234

93
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
Other w/o SNAP Conversion Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
→
Port Configuration.
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration.... The Frame Conversion Configuration screen appears.
Select Other Frames w/o SNAP Conversion Parameters Change...
Other Frames w/o SNAP Frames Conversion
Sets the state of the Other Frames w/o SNAP frames Conversion. Possible values
are Enabled and Disabled. If the state is set to Disabled, Other Frames w/o SNAP
traffic will be dropped.
Default: Enabled.
Other Frames w/o SNAP: Token-Ring Format
Sets the format of Other Frames w/o SNAP frames on Token-Ring.
Formats available
•
802.5
Frame in the IEEE 802.5 format.