Olicom CrossFire 8730, Reference Manual

Page: 166 / 234

152
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Monitoring the Network from the Statistics Menu
802.5 State Information Screen
To open this screen, do the following:
1. Starting from the main menu, select Statistics
→
Port Statistics.
2. Enter a Token-Ring port number, 1 - 20.
3. Select 802.5 State Information...
This screen provides IEEE 802.5 state information.
Ring Status
The current port status on the ring. This could be used to diagnose fluctuating
problems that can occur on token rings, after a station has successfully been added
to the ring. This field has the general format “0x##### - text string” where #####
is a hexadecimal error code value, and ‘textstring’ can be No Status, OK, or a short
text string indicating an error. Before an open is completed, the field has the value:
0x20000 - No Status. If no problems are detected, this field will display 0x00000 -
OK.
Error conditions are indicated by 0x##### and a text string identifying the error.
The text ‘see below’ may also be displayed. In this case the error text is displayed
further down on the screen.
Ring State
The current port state with respect to entering or leaving the ring. Possible values
are: Opened, Closed, Opening, Closing.