Olicom CrossFire 8730, Reference Manual

Page: 98 / 234

84
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
IP: Ethernet Format
Sets the format of IP frames on Ethernet. Available formats:
•
802.3 SNAP
Frame in the IEEE 802.3 format with SNAP
•
Ethernet II Frame in Ethernet II format
Default: Ethernet II.
Source Routing
Enables or disables Source Routing in IP frames transmitted to Token-Ring. The
possible values:
•
SR Source Routing information will be added to frames
converted from Ethernet to Token-Ring format.
•
noSR
Frame will be transmitted to Token-Ring as a transparent
frame.
Default: SR.
Explorer Frames Type
Sets the types of explorer that should be used for IP traffic. Possible values:
ARE The All Routes Explorer should be used.
STE The Spanning Tree Explorer should be used.
Default: STE. (change to ARE for typical Token-Ring behaviour for ARP frames)
Enable IP Fragmentation
Enables or disables fragmentation of IP frames received from Token-Ring and
transmitted to Ethernet. The possible values are Enabled and Disabled.
Default: Enabled.
TR MAC Address for IP Multicasts
Allows entering the IP multicast address. The address is entered in the MAC
address format.
Default: C00000:040000.