Olicom CrossFire 8730, Reference Manual

Page: 153 / 234

139
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Monitoring the Network from the Statistics Menu
Ins
Indicates if the port is currently inserted into the ring. Possible values are Yes and
No.
Spd
For the Token-Ring ports, the Token-Ring media speed. Possible values are 4 and
16.
For the Fast Ethernet ports, the connect speed in Mbps, which is always displayed
as 100 for Fast Ethernet virtual ports. Note that 100 Mbps full-duplex is the total
bandwidth available on a Fast Ethernet port and is shared by all the virtual ports on
that port. The actual bandwidth on a particular virtual port thus depends on the
amount of traffic on other virtual ports.
Oper Mode
The port operation mode. Possible values for Token-Ring ports are:
•
HDX port—Half-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrator’s.
•
HDX station—Half-duplex mode in which the port operates like a station. The
connection may be dedicated or shared. The Tx/Rx pinouts are the same as an
adapter’s.
•
FDX port—Full-duplex mode in which only a dedicated connection to a
station is supported. The Tx/Rx pinouts are the same as a concentrator’s.
•
FDX station—Full-duplex mode in which the port operates like a station. The
connection may be dedicated or shared. The Tx/Rx pinouts are the same as an
adapter’s.
•
RI—Ring In. Only displayed for ports 19 and 20.
•
RO—Ring Out. Only displayed for ports 19 and 20.
•
RI/RO—Ring-in/ring-out mode. Only displayed for ports 19 and 20.
•
Passive - this value will be displayed if the port is selected as a passive
monitoring port on the Switched Port Analyzer configuration screen.
The operation mode for Fast Ethernet virtual ports is HX (Half dupleX) or FX (Full
dupleX).
Fwd Mode
The forwarding mode that will be used for transmit. Possible values for Token-Ring
ports are:
•
Cut-Thru—cut-through