Olicom CrossFire 8730, Reference Manual

Page: 71 / 234

57
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
•
Secondary 1 - for a backup connection to the Ethernet cloud. This connection
is always blocking if Primary is active.
•
Secondary 2 - for a second backup connection to the Ethernet cloud. This
connection is always blocking if Primary or Secondary 1 are active.
Each CRF of Fast Ethernet ports connected to the same Ethernet cloud must have
a different connection attribute set.
Ports in TrCRF
This parameter lists the ports assigned to the CRF.
VLAN Parameter Configuration for TrBRF Screen
To open this screen, do the following:
1. From the main menu, select Configuration
→
VLAN Configuration
→
VLAN Configuration.
2. Select View..., Add... or Change...
3. When prompted, enter the VLAN ID for the TrBRF.
Use the this screen to add or change a BRF. Note that the trbrf-default cannot be
deleted. Also, the trbrf-default cannot be assigned new BRFs. The BRF screen is
shown below.
The following information is displayed on this screen: