Olicom CrossFire 8730, Reference Manual

Page: 119 / 234

105
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
— Any packet with the specified destination address is blocked at the
specified port(s).
•
Allow any packet with Source Address—Allow Src
— If a packet is received from a specific address it is allowed to go to the
specified port(s). This feature is used in conjunction with port security.
•
Allow any packet with Destination Address—Allow Dest
— If a packet is sent to a specific address, it is allowed to go to the specified
port(s). This feature is used in conjunction with port security.
•
Allow any packet with Limited Multicast Address to ports(s)—Allow Lma
— If a packet is sent to the specific multicast address, it is allowed to go to
the specified port(s) only.
•
Force a packet with the Destination Address to certain port—Force Dest
— When a packet with a specific address must go to a specified port.
➽
Note: Force a packet is for test in network or troubleshooting only. Must not be
combined with Port Security Filter.
Applied Ports
The input port(s) that this filter entry is applied to (for that specified MAC address).
Exit Ports
The specified port(s) where a packet is allowed to go, or forced to go (for that
specific MAC address). This applies only to the Allow lma and Force Dest filters.