Olicom CrossFire 8730, Reference Manual

Page: 132 / 234

118
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1 Switch Configuration
Serial Link Configuration Screen
Use the Serial Link Configuration screen to configure a switch when using a
modem to create a console session.
To open this screen from the main menu, select Configuration
→
Console
Configuration. Then select Serial Link Configuration.
Hardware Flow Control
Enables or disables RTS/CTS handshaking.
Default: Disabled
Software Flow Control
Enables the XON and XOFF characters, which are 11 and 13 hexadecimal, respectively.
Default: Disabled
Autobaud Upon Break
Indicates whether the baud rate is reset when a Break key sequence (pressing
ENTER
rapidly for five seconds) is sent or received. The default is Disabled. When
set to enabled, a baud rate change can be accomplished by changing the baud rate
of the terminal emulator, disconnecting and reconnecting the TIA/EIA-232 cable,
and then pressing
ENTER
until a screen appears.
Console Baud Rate
The baud rate of the TIA/EIA-232 port. Acceptable baud rates for the console are
1200, 2400, 4800, 9600, 19200, 38400, 57600, or Autobaud. The default value for