Page 60
DH1 BASE UNIT / DH2 WIRELESS GATEWAY
USER GUIDE
7.
Under IO Bus tab, select RTU or Ethernet port
a.
Select RTU or RS485 port, and select Slave ID
8.
Click Modbus Inputs tab and configure input settings
a.
Set read interval and rest of settings
9.
Click Modbus Outputs tab and configure output settings
a.
Configure output settings
10.
How to map inputs reads to Gateway’s Modbus register holding
table
a.
Double-click on Gateway in the Project Tree
b.
Click on “Imports” tab
c.
Right-click over import points and select paste to Integer or float table
d.
Select “Modbus” tab and verify Modbus register mapping
Controlled Copy
